Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Palm Beach Gardens?
Panel replacement in Palm Beach Gardens typically costs $250 – $500 for a standard residential door, and most jobs are done the same day. That range covers removing the damaged section, matching the profile and color, and hanging a new panel with the existing track and hardware. The written estimate we give you after we look at the door is the price, so the number doesn’t move once work starts.
Call (866) 490-4428 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most panel replacements in Palm Beach Gardens run $250 – $500 per job, and a single cosmetic panel often lands near the bottom of that range.
- Damage that’s cosmetic and on one section is usually worth repairing; damage that has bent the track or warped the frame often isn’t.
- Matching a panel to an older door is the biggest wildcard in this market, because a discontinued profile can force a wider repair.
- Our technicians have up to 15 years of experience and are factory-familiar with Clopay, Amarr, Wayne Dalton, Raynor, and the other major lines.
- Free estimates, and the price is set per job by the written estimate. Call (866) 490-4428.
Panel Replacement Cost Breakdown (2026)
Here’s how the typical estimated ranges break down for Palm Beach Gardens. These are the ranges we work from; the written estimate sets the final price.
| Line item | Typical estimated range | Notes |
|---|---|---|
| Single cosmetic panel (dented, scuffed, faded) | $250 – $350 | One section of a standard sectional door; cheapest, most common job |
| Two or more panels in one visit | $350 – $500 | Labor and setup are shared, so the per-panel cost drops |
| Panel plus track realignment | $350 – $500 | Common when an impact knocked the panel and bent the track with it |
| Panel plus roller replacement | $350 – $450 | Worn rollers often get replaced while the door is open anyway |
| Panel plus cable repair | $280 – $500 | Only if the cable was damaged in the same event |
| Spring repair (for reference) | $180 – $340 per spring | A matched pair is usually replaced together, so a pair is about twice that |
| Cable repair (for reference) | $130 – $250 | Separate from panel work unless damaged at the same time |
| New door installation (if repair no longer adds up) | $700 – $2200 | Worth pricing if the frame or multiple panels are gone |
Panel replacement sits inside the broader garage door repair band of $150 – $600, which is why a one-panel fix lands in the middle and a panel-plus-track combo pushes toward the top. What moves you up or down is mostly the panel itself: its size, its profile, its insulation, and whether it’s still made. A plain 8-foot steel panel in a popular color is the bottom of the range. A full-width insulated panel in a discontinued design can drag the job toward $500 or make repair impractical. The good news is that most Palm Beach Gardens panel work stays on the lower half of the range, because standard doors are popular doors.
What Affects Panel Replacement Pricing in Palm Beach Gardens
No two doors are the same, and the variables below explain most of why one panel job costs $250 and the next costs $500.
- Panel availability and profile match. The single biggest lever. If your door is a current model from Clopay, Amarr, Wayne Dalton, or Raynor, the panel is a stock item and the cost stays low. If the profile was discontinued, we either match close and accept a small shading difference, or quote a wider repair. We tell you which before you commit.
- Insulated versus non-insulated. Insulated panels cost more as a part, and swapping an insulated section for a non-insulated one changes the door’s weight balance. We check the balance after any panel swap and adjust the springs if needed.
- Color and finish match. A standard white or almond finish matches easily. Custom colors, wood-look finishes, and windowed panels take longer to source and cost more. In this market, sun-fade on the older panels is the thing we watch: a new panel next to a faded door is a visible mismatch even in the right color code.
- Damage below the surface. A dent looks cosmetic until we open the door and see a twisted hinge or a bowed vertical track. If the frame bent with the panel, that secondary work is what pushes the job from $250 into the $400 – $500 end of the range. If a torsion spring or a cable has failed at the same time, that’s separate repair on top.
- Hurricane-region door construction. Palm Beach Gardens doors often carry heavier-gauge panels and reinforced hinges, since Florida homes are built to resist wind. That’s a plus for durability and a factor in part cost. Replacing a panel on a reinforced door means matching that reinforcement, not just the paint.
- Door size and panel width. An 8-foot-wide door takes narrower panels than a 16-foot double, and a double takes roughly twice the material for the same job. Width and height move the number more than most homeowners expect.
Does One Panel Match the Rest of the Door?
It can, but a perfect invisible match isn’t guaranteed, and any honest shop should say so up front. Paint fades. A door that’s been in Florida sun for a decade won’t be the same shade as a panel that left the factory last month, even if the color code is identical. There are three realistic outcomes:
- Close match. The profile and color line are still in production and the fade is minor, so the new panel reads as part of the door from the street.
- Noticeable but acceptable. The panel is the right profile but a shade off. Most homeowners accept this and let time do the rest.
- Better to replace the door. If the profile is discontinued and the mismatch would be obvious, we price a full new door starting at $700 so you can compare. Often repair still wins. Sometimes it doesn’t. We show you both numbers and let you decide.
If you want to think through the repair-versus-replace call in more depth, our guide to panel replacement walks through which damage justifies a panel and which justifies a door.
Repair or Replace? How to Decide on a Palm Beach Gardens Door
As a rule of thumb, a door with one damaged panel and a straight track is a repair. A door with a bent frame, several damaged panels, or a discontinued profile usually justifies pricing a replacement. Here’s how we sort it in the field:
- Repair if: one panel is dented or cracked, the track is true, the door still lifts and lowers smoothly, and the panel is still in production.
- Consider replacing if: the frame itself is bent, two or more panels are damaged across different sections, the door is a discontinued model with no good match, or the door is already toward the end of its life on springs and rollers.
- Add spring and opener work if: the door won’t stay balanced, or the opener strains to lift it. A new panel changes door weight, so the balance check matters.
If you’re weighing a broader repair against replacement, our page on Palm Beach Gardens Garage Door Repair Pros covers the full repair menu, and we’re glad to look at the whole door and tell you what actually needs doing rather than what it’s easiest to sell.
How the Job Usually Goes
Panel replacement is one of the more straightforward jobs in this trade, but the setup is where the real work happens.
- Look and measure. We identify the door make and model, measure the panel, and confirm whether the profile and color are still available. If they aren’t, we explain the match options before any work starts.
- Free the door safely. The door is opened to the right height, the opener is disengaged, and the torsion spring tension is managed so the panel can be removed without the door dropping. This is the part homeowners shouldn’t try themselves.
- Remove the damaged panel. Hinges come off, the panel lifts out, and we check the track and frame behind it for anything that bent with the impact.
- Hang the new panel. The replacement goes in, hinges reattach, and the panel is seated and aligned. If windows or decorative hardware are involved, they transfer or are replaced.
- Balance and test. We run the door up and down, check it holds position at mid-travel, adjust the springs if the weight shifted, and re-engage the opener.
A single-panel job is usually done the same day. Multi-panel work with track realignment can run longer, and we tell you the schedule in the estimate.
The Safety Side of Panel Work
A garage door spring holds the weight of the whole door at full tension, and that tension has to be managed before a panel comes out. That’s why we handle panel work as a spring-aware job, not just a cosmetic swap. Our technicians work with the springs backed off or blocked properly, and we never let a homeowner do that part. If your door is hanging on a broken spring right now, don’t force it open: call us. We’ll come out, secure it, and quote the panel and spring together in one written estimate.
How to Save on Panel Replacement
Panel replacement is already one of the more economical fixes on a garage door, but a few things keep the price toward the low end of the range.
- Get more than one panel done at once. If a second panel is dented or scuffed, replacing both in one visit shares the setup and drops the per-panel cost. It’s often cheaper than two separate calls.
- Match a current line instead of chasing a discontinued one. If a close match is acceptable, you save significantly over hunting a rare panel.
- Combine with routine service. If your rollers are worn or the track is slightly out, roll it into the same visit. Roller replacement runs $110 – $220 and track realignment $120 – $240 on their own; bundled with a panel, you’re saving the second setup.
- Ask for the written estimate first. We give a free estimate before any work. There’s no diagnostic charge to look at the door and tell you what it needs.
- Fix the cause, not just the dent. If the panel was hit because the door was moving unevenly, a bent track or worn roller will keep damaging panels until it’s corrected.
Call (866) 490-4428 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Specialization Keeps Panel Pricing Honest
A generalist handyman and a garage door specialist look at the same dented panel and see different jobs. We see the panel, the hinge behind it, the balance of the door, and the model line it came from. We’re factory-familiar with eight of the most widely installed garage door brands, including Clopay, Amarr, Wayne Dalton, Raynor, LiftMaster, Chamberlain, Genie, and Craftsman, so we know which panels interchange and which don’t without a return trip.
That brand knowledge is why our estimate tends to hold. Our technicians have up to 15 years of experience, and we handle the full arc of the door: springs, cables, rollers, tracks, openers, and full installation. If your panel job turns out to need an opener adjustment or a spring replacement, one call covers it, and we don’t pass you to a second company. Panel work, opener work, and spring work all sit inside the same trade, and that’s all we do.
Panel Damage During a Storm
Hail is uncommon here, but summer storm debris is not, and branches and wind-blown items are the usual cause of a cracked or torn panel. When something does hit the door, check three things before you call: whether the door still lifts smoothly, whether the track behind the panel is straight, and whether the door sags on one side. If any of those are off, stop using the opener and call. A panel that looks fine can hide a bent section of track, and driving the door over bent track bends more panels.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Palm Beach Gardens?
Panel replacement in Palm Beach Gardens typically costs $250 – $500 for a standard residential door. A single cosmetic panel often lands near $250 – $350, and a job that includes a track realignment or a second panel pushes toward $500. The written estimate sets the final price. Call (866) 490-4428 for a free quote.
Can you replace just one panel, or do I need a whole new door?
One panel can usually be replaced if your door’s model and profile are still available. The cost is $250 – $500. You only need a full door, which starts around $700, if the frame is bent, several panels are gone, or the profile is discontinued with no good match. Call (866) 490-4428 and we’ll tell you which applies after we see the door.
Is it cheaper to repair the panel or replace the whole door?
Repair is usually cheaper: $250 – $500 versus $700 – $2200 for a new door. The exception is a door that’s already aged out on springs, rollers, and a discontinued panel, where repair stops making financial sense. Our technicians have up to 15 years of experience in judging that line, and we quote both numbers so you can compare. Call (866) 490-4428 for the free estimate.
Can you come today?
Same-day panel work is often possible. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (866) 490-4428 and we’ll get you on the schedule.
Will a new panel match the color of my existing door?
It can match closely if the color line is still in production, but a door that’s spent years in the Florida sun will read a shade different from a new panel. That’s normal, and we tell you before you commit. If the mismatch would be obvious, we’ll quote a full door starting at $700 so you can weigh both. Call (866) 490-4428 for a free look.
Do I need an estimate before work starts?
Yes, and it’s free. We look at the door, quote the panel and any related work in writing, and that written estimate is the price. We don’t start work until you’ve seen the number. Call (866) 490-4428.
Get Your Free Panel Estimate
If a panel is dented, cracked, or hanging at an angle, don’t let the opener keep running over it. Call Palm Beach Gardens Garage Door Repair Pros at (866) 490-4428 for a free estimate on panel replacement. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One call covers it – panel, opener, spring, or full replacement – and you’ll know the price before we start.
Pricing reflects the Palm Beach Gardens market as of 2026. Palm Beach Gardens Garage Door Repair Pros offers free estimates – call (866) 490-4428.
Written by the team at Palm Beach Gardens Garage Door Repair Pros.
What Our Customers Say
"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Craig Rhodes"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Robert Lawson"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Adam Sutton